92/38, No.12 Street, Quarter 18, Binh Hung Hoa Ward, Binh Tan District, Ho Chi Minh City, Vietnam.

Preliminary investigation Log in Registration

Your cart

(0) Product

Hotline_247 0902720814

Home|News

Difference Between Common Industrial Valves

15/04/2026

Difference Between Common Industrial Valves

🔹 1. Globe Valve

Function: Flow regulation and throttling
Structure: Disc moves up and down perpendicular to flow
Advantages: Precise flow control
Disadvantages: Higher pressure drop
Applications: Steam, oil, chemical systems

👉 Best for frequent flow adjustment

🔹 2. Gate Valve

Function: Full open / full close
Structure: Gate moves vertically to block flow
Advantages: Very low pressure loss
Disadvantages: Not suitable for throttling
Applications: Main pipelines, water systems

👉 Best for on/off isolation

🔹 3. Ball Valve

Function: Quick shut-off
Structure: Rotating ball (90° turn)
Advantages: Fast operation, excellent sealing
Disadvantages: Not ideal for precise throttling
Applications: Oil & gas, air, chemical systems

👉 Best for fast and tight shut-off

🔹 4. Butterfly Valve

Function: On/off and light throttling
Structure: Rotating disc inside the body
Advantages: Lightweight, cost-effective, easy installation
Disadvantages: Lower sealing performance than ball valves
Applications: HVAC, water systems, fire protection

👉 Best for large-diameter pipelines

📊 Quick Comparison Table

Valve Type	Main Function	Sealing	Pressure Loss	Applications
Globe Valve	Flow control	Good	High	Steam, oil
Gate Valve	On/Off	Very good	Low	Main pipelines
Ball Valve	Quick On/Off	Excellent	Low	Oil, gas
Butterfly Valve	On/Off + light control	Medium	Medium	HVAC, water

🏭 Conclusion

Choosing the right industrial valve such as a globe valve, gate valve, ball valve, or butterfly valve is essential for system efficiency, safety, and long service life.

Need precise flow control → Globe Valve
Need pipeline isolation → Gate Valve
Need fast shut-off and tight sealing → Ball Valve
Need cost-effective large pipeline solution → Butterfly Valve

📞 Contact Information

PHUC MINH ENGINEERING – pm-e.vn specializes in supplying industrial valves, piping components, gaskets, packing materials, and international standard equipment.

🌐 Website: pm-e.vn
📧 Email: info@pm-e.vn
📱 Hotline: +84 907 450 506 – +84 902 720 814 – +84 902 800 728

Difference Between Common Industrial Valves

Related News

What Is a Flame Arrester? Why Is It Necessary?

02/07/2026

In storage and transfer systems handling flammable media such as petroleum products, chemicals, solvents, LPG, LNG, and other hazardous gases, one of the most critical safety risks is flashback ignition through piping or vent lines. A single ignition source at the vent outlet or in the surrounding environment can allow flame propagation back into the storage tank, potentially resulting in catastrophic fire or explosion.

What Types of Valves and Equipment Are Commonly Installed with a Flame Arrester?

02/07/2026

A Flame Arrester is typically not installed as a standalone device. Instead, it is commonly used in combination with safety devices such as Breather Valves, Emergency Vent Valves, and Check Valves. Each component serves a specific function, including pressure regulation, emergency pressure relief, or reverse flow prevention. Depending on the application—such as petroleum storage tanks, gas handling systems, or welding and cutting equipment—the combination of these devices will vary to provide comprehensive safety and reliable system protection.

When Is a Tank Breather Valve Required?

02/07/2026

A breather valve (Pressure Vacuum Relief Valve – PVRV) is a critical safety device for oil and chemical storage tanks. It helps balance pressure and vacuum conditions during filling, emptying, and temperature changes. This article provides a detailed analysis of five mandatory cases for installing a breather valve according to the API 2000 standard, helping engineers select the correct equipment, improve operational safety, and reduce product vapor losses.