Van vòi & vòi phun nước

90-FS-PRV-15

Factory Set Pressure Reducing Valve

The Cla-Val 1 ½” Model 90-FS-PRV-15 Is a UL/ULC listed Factory Set pressure reducing valve which can be used as a standpipe valve, floor control valve and a checking device. 

The valve is in compliance with NFPA for Class II systems and can handle “flow” and “no flow” conditions and rated for systems up to a maximum inlet 300 psi.

 

90-FS-PRV-25

Factory Set Pressure Reducing Valve

The Cla-Val 2 ½” Model 90-FS-PRV-25 Is a UL/ULC listed Factory Set pressure reducing valve which can be used as a standpipe valve, floor control valve and a checking device. 

The valve is in compliance with NFPA for Class I systems and can handle “flow”and “no flow” conditions and rated for systems up to a maximum inlet pressure of 400 psi.

 

90-ADJ-PRV-15

Field Adjustable Pressure Reducing Valve

The Cla-Val 1 ½” Model 90-ADJ-PRV-15 features a Forged Brass finish body with Forgeline Bonnet and Seat Assembly. The system water pressure is controlled by adjusting the flow restriction, however, if full flow is required the restriction can be overridden. This heavy-duty design is factory tested to 300 psi (2070 KPa). It is also UL/ULC Listed.  A brass body is standard but can be supplied with a polish chrome, cast chrome or polish brass finish.

 

90-ADJ-PRV-25

Field Adjustable Pressure Reducing Valve

The Cla-Val 2 ½” Model 90-ADJ-PRV-25 features a Forged Brass finish body with Forgeline Bonnet and Seat Assembly. The system water pressure is controlled by adjusting the flow restriction, however, if full flow is required the restriction can be overridden.This heavy-duty design is factory tested to 300 psi (2070 KPa). It is also UL/ULC Listed.  A brass body is standard but can be supplied with a polish chrome, cast chrome or polish brass finish.

90-PRV-175-15

Pressure Restricting Valve

The Cla-Val 1 ½” Model 90-PRV-175-15 features a cast brass finish body with Forgeline Bonnet and Seat Assembly. The system water pressure is controlled by adjusting the flow restriction; however, if full flow is required, the restriction can be overridden.

This heavy-duty design is factory tested to 300 psi (2070 KPa). It is also UL/ULC Listed and FM approved.

90-PRV-175-25

Pressure Restricting Valve

The Cla-Val 2 ½” Model 90-PRV-175-25 features a cast brass finish body with Forgeline Bonnet and Seat Assembly. The system water pressure is controlled by adjusting the flow restriction; however, if full flow is required, the restriction can be overridden.

This heavy-duty design is factory tested to 300 psi (2070 KPa). It is also UL/ULC Listed and FM approved. 

HV-100-15

Fire Hose Valve

The Cla-Val 1 ½” Model HV-100-15 features a cast brass finish body with Forgeline Bonnet and Seat Assembly. 

HV-100-25

Hose Valve

The Cla-Val 2 ½” Model HV-100-25 Hose Valve features a cast brass finish body with Forgeline Bonnet and Seat Assembly. 

 

Thông tin chi tiết xin liên hệ:

Công Ty TNHH Kỹ Thuật Phúc Minh
🏢 92/38 Đường số 12, KP18, P.Bình Hưng Hòa, Q. Bình Tân, Tp.HCM
☎️ (028) 3535.2125 – 0902720814 - 0907450506
📥 sales@pm-e.vn/ info@pm-e.vn
🌐 www.pm-e.vn